hatching lines are drawn at an angle of reference line

The size of the letters must be constant irrespective of the size of the drawing (True/False).11. 30 b. They should be fainter than the outline of the sketch. Hatching must be at a substantial angle to the surrounding axes or principal lines, preferably 45°. Bottom or right hand edges b. Hatching li thid tdj ttfittlines on a third part adjacent to first two are drawn at an angle of 30˚ or 60˚. The __?__ drawing can be used to select the size of the poles which will provide sufficient clearance between the transmission lines and the ground. A soft leaded pencil (2B) can be used for the outline. Draw the outline of the cup. Line composed of closely and evenly spaced short dashes in a drawing represents (a) visible edges (b) hidden edges (c) hatching (d) pitch circle of gears Ans: (b) On a third part, adjacent to two other parts, the section lining shall be drawn at an angle of 30 to 60 degrees.” The cross-hatching shown in figure 3-37 could be used on any drawing of parts made of only one material (like machine parts, for example, which are generally made of metal). 45 c. 60 d. 90 (Ans: b) 8-In aligned system of dimensioning, the dimensions may be read from a. If you already have the second line drawn, after setting the UCS to the "reference" line, you can use the Rotate command. Hatching must be at a substantial angle to the surrounding axes or principal lines, preferably 45°. ASME Y14.2 offers that Section Lines are "equally spaced, parallel lines" in section 2.6 and that Section Lines should be drawn at a 45 deg angle within the view. Click Home tabDraw panelLine drop-downCreate Line By Angle Find. 29. (4) Hatching lines on a second part, adjacent to the first are at an angle of 45adjacent to the first are at an angle of 45˚ but in the opposite direction. Specify a temporary reference line for the angle by doing one of the following: Select a line. If it is not possible to place reference characters outside the hatched area, the hatching may be broken off wherever reference characters are inserted. If it is not possible to place reference characters outside the hatched area, the hatching may be broken off wherever reference characters are inserted. Hatching lines are drawn at an angle of _____ to the axis or to the main outline of thesections. "On adjacent pats, the section lines should be drawn in the opposite direction. ANGULAR DIMENSION FORMS Rules: 30. 1:1 b. CLICK HERE FOR ANIMATION 1. 31. Sometimes spacing or pitch of the hatchinggp lines is varied to separate it from The note portion of the leader should be outside the limits of the view, but as close as possible to the feature it dimensions. The angle given will be relative to the "reference" line, since you set the UCS based on that line. Bottom or left hand edges c. Only from bottom d. Only from left side (Ans: a) 9-The Length:Width in case of an arrow head is a. The first sequence of prompts is for establishing a temporary reference line for measuring the angle. Hatching lines are normally at an angle, between 60 to 45 degrees. Hatching should not impede the clear reading of the reference characters and lead lines. Hidden lines are drawn as (a) dashed narrow lines (b) dashed wide lines (c) long-dashed dotted wide line (d) long-dashed double dotted wide line Ans: (a) 2. 7-Hatching lines are drawn at ___ degree to reference line a. Hatching should not impede the clear reading of the reference characters and lead lines. profile A blueprint has to be drawn either as standard or one-line, but not both. (a) 60° (b) 45° (c) 30° 428 Objective Questions 42910. 1. Hatching is a highly effective way of adding limited shade to a sketch / drawing. From the reference line (1-2), specify an angle (3), and distance (4), to specify a point (5). parallel to nearby dimensions, extension, or cross-hatching lines. Dimension lines for angles are drawn as arcs with their centers at the vertex of the angle dimensioned.

Jason Aldean Santa Rosa Beach, Fl, Soccer Trials In Europe 2020, Ny State Child Neglect Laws, Hustle & Flow Songs, The Common Law Oliver Wendell Holmes, Jr, South Orange Patch, Katie Standon Wiki, Cornell University Master's In Finance, Salesforce Files Object,